Plastic materials include polystyrene, nylon, polypropylene, and polythene. These are thermoplastics: they are heated and then pressured in a mold which can form them into different shapes and sections.

CNC machining can produce a wide array of parts from the simplest component to the most complex assembly. Need to machine a gear shaft for a vehicle? Or an inlet for a heat exchanger shell on a military transport vehicle? What about a precision electrical contact for a fighter jet or a lifesaving pa...

Gear hobbing produces gear teeth by rotating a cylindrically shaped cutter called a “hob” (hence the term gear hobbing) depicted in the gear hobbing machine interface below. The hob can be single-threaded, depending on how many teeth per revolution should be generated.

Finding the Right Secondary Operations After CNC Machining, Part III: Hardware Installation

Custom injection molding is a manufacturing process that produces custom plastic parts. It is used to manufacture a variety of plastic products, including automotive parts, electronic components and medical devices. 24+ FANUC Injection Molding machines Thousands of resins to choose from Production a...

Plastic Injection molds are custom-designed to produce the desired plastic product. Injection mold consists of two parts, the core and the cavity, which work together to form the desired shape of the plastic product. 21+ years' experience mold factory ISO 9001 certificated Standard Tolerances a...

Prototype injection molding is a process for manufacturing small batches of plastic parts. This process is typically used in the initial stages of product development to produce test parts quickly and efficiently for testing purposes. Satisfy low volume production needs Lead time of 1-7 days 1000 + ...

Besides standard milling service for parts in engineering plastics or metals, we also offer CNC routing service for prototypes and parts in soft materials such as EPS foam, EVA, woods.

Swiss machining is an efficient way to produce complex, or slender component. By moving both live tooling and the workpiece, we can always cut the material which is close to the workpiece holder. To avoid deformation compared to traditional CNC lathe.

If you need a super flat surface part, or round part that needs OD and ID +/- 0.005mm in tolerances, our CNC grinding machining service will be the best match of your production needs for such type of parts.

EDM and wire-cut is one of the CNC machining processes which uses copper, graphite pattern or molybdenum wire to achieve the design for sharp corners, undercuts and remove whatever un-needed material from workpieces. EDM is also widely used for rapid tooling and production mold making.

With 32 sets of 5-axis CNC milling machines in-house which allows us to mill tight tolerance plastic and metal parts with complex geometries easily. And we also offer low-cost machined parts by using our 3-, 4-axis milling machines.